Xiamen MuRuJia Trade Co.,LTD
Xiamen MuRuJia Trade CO.,LTD
Add to Cart
In the toilet when decorating, the right of choose and buy closestool is a very important matters, and complexity is a, if the toilet bowl to keep mouth and toilet size, but more trouble, and are likely to use the toilet shifter.Today we're going to look at the toilet shifter, and what are the specifications and usage points of the toilet shifter.
What about the toilet shifter?
1. The toilet shifter is a kind of pipe fitting, which is a device that can change the position of the water port under the surface when the water port under the floor and the water outlet at the bottom of the toilet are not suitable.If the bathroom wall and drainage apertures already had been fixed, and buy the drainage pipe mouth of the outlet of the toilet and bathroom can't butt will use this kind of pipe fitting, only use the pipe to make the two docking.
2. The toilet shifter can not only change the position before and after the water inlet on the floor, but also change the position of the left and right sides of the water.If can't find this small wall is apart from the toilet, can be used shifter forward out of 5 cm, and next to the toilet is the head of the water, such as pillars in big package, implement too crowded or not fit, also use shifter regulation about location.
3, after using the toilet shifter, the toilet will be clogging up than before, and curve will more than before discharge pipes, pipe pressure will increase, it is easy to cause the reverse flow of polluted water, and toilet flush function can not fully play out, so unless necessary, try not to install a toilet shifter, if had to install a toilet shifter, connected by the distance is not too long.
4. The larger the displacement of the toilet shifter, the larger the slope.So before install shifter to stick floor tile, plane down to the ground or mat high ground, the ground raise, the toilet will have improved and elevated toilet side needs to affix ceramic tile to beautify.
| Name: | The toilet connects the shifter. |
| Type: | S-103-2 |
| Brand: | San-Tide |
| Origin: | Chian xiamen |
| Product category: | Toilet shifter |
| Usage: | On line type |
| Structure: | even |
| Flushing mode: | Strong fall type |
| Flush key: | Go up and down. |
| USES: | The drain |
| Specifications: | optional |
| Color: | white |
| Performance: | The toilet shift |
The toilet shifter is installed.
But in the daily life, because decorate, toilet needs to shift to things, so, have to know the specific circumstances, toilet shifter installation to ensure that does not affect the toilet decorate and does not affect the daily for using the toilet.In today's building materials market, usually the size of the toilet shifter is a standard size, if improperly installed, unable to connect to, lead to upper and lower interfaces and center could set a dangerous precedent for later, a small obstacle to toilet and sewage pipeline jam problem.So the toilet shifter are generally in the hole distance is too long or too short to install, and usually shift distance cannot be more than 10 mm, and must stick after floor tile can be well on the toilet shifter for installation.