Xiamen MuRuJia Trade Co.,LTD
Xiamen MuRuJia Trade CO.,LTD
Add to Cart
The toilet wall is arranged in a row with a common drain tube seat
Install the drain pipe of the rear drain toilet
1. Select the toilet with the same hole spacing according to the hole spacing in your home
2. Prepare the flange, Angle valve, inlet pipe and glass glue for installation.
3. Just install it directly.
| Name: | The wall is arranged to drain the drain pipe. |
| Type: | S-110 |
| Brand: | San-Tide |
| Origin: | Chian xiamen |
| Material: | PP |
| Type: | Plumbing Traps |
| Color: | White |
| Item: | Waste Pipe |
| Application: | W.C Pan |
| Specification: | Use for Soil Pipe 102±5 mm I.D |
| Processing method : | Assembly production |
| USES: | Toilet drainage |
| Specifications: | The question mark tube |
| Foreign trade: | is |
The installation method of toilet and squat toilet is introduced
1. Toilet installation
Toilet installation is relatively easy, after buying back commonly, oneself install or ask worker teacher to install.Although toilet installation is simple, but master the installation method of toilet is very important, only install accurate toilet ability lets a person rest assured use.Here's a look at the general procedure for installing a toilet.
1. Check the level of sewage pipes and ground water
Should first to discharge pipes before installation closestool to conduct a comprehensive inspection, look at whether there is mud, sand, waste paper and other debris inside the pipe blockage, at the same time check whether around the toilet before and after installing a ground level, such as to find the ground, when installation should be leveling the ground.
2. Determine the sewage pipe center
Flip the toilet, determine the center on the toilet drain, and draw the cross center line, which should extend to the feet around the bottom of the toilet.
3. Fixed toilet
Align the cross wire on the toilet with the floor drain, keep the toilet installed horizontally, press the sealing ring firmly, install the floor screw and decorative cap.
4. Make the bottom seal well
Install a special seal ring on the toilet drain, or make a round of glass glue (putty) or cement mortar. The ratio of cement to sand is 1:3.